氣液增壓泵怎樣推進密封圈運用提升
密封圈的設備央求，密封圈是處置氣液增壓泵系統泄露難題最首要、最有用的手腕。液壓系統假定密封圈不良，密封圈可以出現不容許的外泄露，外漏的油液將會凈化環境；還可以使空氣進入吸油腔，影響氣液增壓泵的使命功用和液壓施行元件間斷的波動性。因此，合理地選用和描繪密封圈的設備在氣液增壓泵的描繪中十分首要，對密封圈設備的央求如下：Sealing ring device begged, the sealing ring is disposed of gas-liquid booster pump system leakage problem the most important, the most useful wrist. Hydraulic system assumes that the bad sealing ring, sealing ring can appear the leakage is not allowed, the oil will leak purifying the environment; also can make the air into the suction chamber, the volatility of the gas-liquid booster pump function and implementation of components of hydraulic mission break. Therefore, rational selection and depicting the seal equipment in the depiction of the gas-liquid booster pump is first, to beg seal equipment are as follows:1. 密封圈在使命壓力和必定的溫度計劃內，應具有超卓的密封功用，并跟著壓力的增加能自動跋涉密封功用。The 1 sealing ring on the pressure and temperature of the mission will be planned, should have good sealing performance, and with the pressure increase can automatically trek sealing function.2. 密封圈設備和間斷件之間的摩擦力要小，摩擦系數要安靖。The 2 seal equipment and discontinuous friction between the friction coefficient of small, to rest.3. 密封圈抗腐蝕才華強，不易老化，使命壽數長，耐磨性好，增壓缸磨損后在必定水平上能自動賠償。The 3 sealing ring corrosion to Huaqiang, not easy to aging, life long mission, good wear resistance, a pressurizing cylinder wear in a certain extent can automatically compensate.4. 規劃儉樸，運用、保護不方便，液壓缸使密封圈有更長的的壽數。4 planning frugal, use, protection is not convenient, the hydraulic cylinder and the sealing ring has a longer life.設備注重事項編纂本段1、潔凈設備方位；Equipment note compilation of this paragraph 1, clean equipment range;2、消除密封件設備間斷進程中的毛刺；2, eliminate the seal equipment in the process of continuous burr;3、在密封件上涂改潤滑劑；3, the seal alter lubricant;4、保護密封面不受損傷；4, to protect the sealing surface is not damaged;5、復核招認密封件的規范精確； 增壓泵5, check that seals the precise specification; booster pump6、關于需要變形設備的密封件運用相應東西設備。6, about the need to use the corresponding deformation equipment seal things equipment.
氣液增壓泵http://www.jujiaso.cn/
當前位置：
首頁 >>
公司動態 >>
行業資訊
發布時間：
2014-09-09
上一篇：
氣體質量氣密性檢測裝置流量計的優點有哪些？
下一篇：
氣體增壓泵作業原理及其適用范圍